|In a beginning | Main page | The Russian version|

  1. Movement.

The main feature of a "flying saucer" is its ability to change the curvature and the tension of both space field and time field. Figure 18a gives a draft scheme of how a "saucer" (Type 1) influences space layers. The field consumption occurs along the outer perimeter. The space layers pull up to the "saucer", penetrate it, getting thicker towards the center, and, leaving the center, rarefy in a cone shape, making the space under the "saucer" thicker. The creation of thickened and rarefied areas on the concave and convex sides of the "saucer" provides for a pressure differential, manifested through the occurrence of an F force, which makes the entire structure move. Here the boundary lines of the field 1-1 break up and join together back under the cone emitted from the center, thus forming the line 1'-1'. For an outside observer the rarefied field on the concave side of the "saucer" would create an approaching effect, whereas for an observer placed on the convex side of the "saucer" the thickened field would create a "moving off" effect. This process depends on the dependency of a signal propagation speed on the field (space) density. Consequently, we shall consider the speed of light (signal propagation speed) a function of the space field lines' density. We can conclude that such a structure can modify distance (distance "expansion" or "reduction" effect) by rarefying the space structure or making it thicker on local modification of its entropy. At the time when the process stops, both space and time, having reduced the energy of their status, move the object to the location of the minimal entropy, i.e., towards the destination of movement. Figure 18b gives a draft scheme of the process of the space field lines' structure transformation for the 2-nd type "saucer". Figure 18c gives a draft scheme of the 1-st type "saucer" movement in the electric field or in time.

It should be mentioned here that the field lines are shown as straight lines on all the Figures to make the process description a more graphic one. In fact, the field lines are not linear, but it is difficult to adequately show them on a plane drawing. That is why the mutual overlapping of the field lines does not result in their mutual perpendicularity, for all the processes are of a helix-and-screw character.

  1. Combined Type.

The combined type is made up of two "saucers" - 1-st and 2-nd type.

Combined type A (see Figure 19)

The fields' movement pattern is clearly visible on Figure 19. The separated process is carried out according to the following scheme: -1-2-3-4-4'-3'-2'-1'-. In other words, the field enters the center of one half and exits from the center of the other one. You will get the space tension scheme by overlapping Figure 18a with Figure 18b. This structure has the following advantages:

    The narrow-banded incoming field lines bundle provides for an opportunity to accurately read the information on the direction and "velocity" of the movement. The "saucer" travels as if it went along the beam.

    The inner area is protected, which is different from the structure (see Figures 16, 17) where the inner area has its field protection only.

    The internal central flow 1'-1 gives a possibility to pick up certain potential (inner tube), and, possibly, to control the entire system by influencing it.

    Heating the center of one half provides for the necessary temperature gradient for both parts.

Combined type B (see Figure 20).

The separated process is carried out according to the following scheme: -4-4'-. All the other processes are closed. Consequently, this structure will be a stable one. The separated process goes on with no thickening, thus influencing the orientation of the entire structure only. The disadvantage of such a structure could possibly be a certain difficulty in provision of the heat synchronization.

Combined type C (see Figure 21) .

In the frameworks of this structure when points T2 travel to one and the same location the process becomes an entirely closed one. The separated process -4-4'-provides for the orientation only, for no field thickening takes place. The field, so to say, flows around the entire structure. Should point T2 move to the location shown on Figure 22, the process would also be a closed one. The dotted line shows the line of initial close-down. Point T2, however, results in creation of an additional rarefaction area on one side, and additional thickening area - on the other side. In this case the field closes down, should the circumference arc angle exceed 180 degrees. A "dumb-bell" is formed. The separated process in this case is carried out according to the following scheme: -4'-4-and -2'-2-, determining the orientation. Should point T2 move to the location shown on Figure 23, the closed process would be carried out at the periphery. The dotted line shows the line of initial close-down. Additional rarefaction pressure closes the process down should the angle exceed 180 degrees. A circumferential torus is formed. The separated process in this case is carried out according to the following scheme: -1'-1-.With points T2 placed in other locations energy supercharge occurs and leads the system to its collapse. The entire structure is characterized by its polymorphism, i.e., it changes its configuration as a function of points T2 location. The main feature of all the varieties of this structure is the agreement of its fields' configuration with the configuration of nuclear and electron shells:

A sphere -sub-level S;

A "dumb-bell" -sub-level P;

A torus - sub-level D.

The central closed process is an atom "nucleus". One can surely say atoms have no electrons or nuclei!!! What is there instead is only fields' configuration, their energy status, direction of their rotation and orientation. Any change of time density in these structures leads to occurrence of a force inversely proportional to the square of time density increase. Consequently, such a structure allows to perform the studies of micro-processes on a macro-level. It is specifically this combined type B that should be subjected to the most thorough study.

  1. Other Types of Electromagnetic Field Converters.

Figure 24 shows a cylinder made up of two thermocouples, type 1 and type 2. Field thickening occurs along the outer surface according to the following scheme: -2-3-4-4'-3'-2'-. Such a structure corresponds to a "Flying Cylinder" or a "Cigar" type. Fields configuration can also be different depending on the location of points T2. Figure 25 shows the following types: a "Triangle", a "Segment", and a "Boomerang". The center of the thermocouple of these structures is placed at the center of gravity of these figures, which provides for a horizontal stability in the gravitation field. The helix structure's circumference of influence increase or reduction allows to increase or reduce the number of areas available for external field penetration, thus influencing the thrust force Ft. Figure 27 shows a combination of the thermocouple 1-st type, which is definitely of interest. The effects described above could also be obtained by mechanical rotation of rings, disks with convexo-concave shape. The feasibility of these structures' utilization, however, seems to be quite problematic considering their reliability and operational safety. One could say they had become obsolete before they were born.

  1. Possible Utilization.

  1. Energy retrieval directly from the outer space.
  2. Wireless energy transmission.
  3. Moving in liquid, gaseous and air free space.
  4. On the basis of a possibility to accumulate and concentrate energy the question is raised as to the reality of artificial transmutation (obtaining certain elements from other ones).
  5. Micro-processes simulation on a macro-level.
  6. Studies of the time substance.
  7. Generally, there is an infinite variety of possible applications.

  1. Historic Background.

The structures identical to a "flying saucer" were used on Earth several thousand years ago, back in the times of Sanskrit Civilization. Let us quote the description of a "Viman" from the ancient Sanskrit manuscript " Samarangana Sutratkhara":

"Strong and hard should be its body, made of light material, like a huge bird that flies. Inside a device with mercury in it should be placed with a heater made of iron underneath it. Through the force concealed within mercury that drives the carrying whirlwind, a man placed into this chariot can fly over huge distances in a most miraculous way. Four hard vessels for mercury should be placed inside. When these are heated by the controlled fire from the iron heaters, the chariot develops the strength of thunder thanks to mercury and immediately the chariot turns into a pearl in the sky."

The above description contains all the features of the device under study. We have got two different materials, i.e., iron and mercury. We have the carrying whirlwind and heating. One should also pay attention to the number of segments. The question is, though, why mercury? Let us study the thermoelectric series:

Justy series (1948)

Meissner series(1955)

Bi - 80

Bi - 70

Co - 21

Co - 18,5

Ni - 20

Ni - 18

K - 14

K - 12

Pd - 8

Pd - 6

Na - 7

Pb - 0.1

Pt - 5

Sn + 0.1

Hg - 5

Zn + 2.9

C - 3.5

Mo + 5.9

Al - 1.5

Fe + 16

Rh + 1

Sb + 35

Zn + 1.5

Te +400

Ag + 1.5

Se + 1000

Au + 1.5


Cu + 2


W + 2.5


Fe + 12.5


Sb + 42


Si + 44


Te + 49




It is clear that the most adequate material is iron (Fe). Iron had already been known back then and its factor is higher tan, say the one of copper, also a well known material in the ancient times. Of all the materials with the hole-type thermo-emf the best one will be mercury. Pt is very expensive, and nobody knew how to get Co, Ni, Bi and Al. Pb smelts easily. The only option left is mercury. This element was well known and they could extract it. Besides, mercury is a very active liquid, which smelts most metals with the exception of iron), and when it comes into contact with iron, the thermoelectric contact, or, in other words, soldered joint, is provided for automatically. As far as other metals are concerned, such a joint should be prepared for them in advance, whereas mercury wets iron well. Now let us turn to the ancient Sanskrit sign well known nowadays as a "swastika" (see Figure 26). It is nothing else but the electric current diagram for a "Viman", or, in other words, a "flying saucer". It means that thousands years ago people knew about these devices, built them and used them, having no complex machinery and equipment. A "flying saucer" is as simple as any stoke of genius.

  1. Sources of Information.

Let us quote several passages in this paragraph:

"Thus, on centripetal energy movement the Matter (Space) thickens and the density of Time rarefies in the Center of Fire Movement. In the Circumference of the Energy Influence in this case the Matter (Space) rarefies and the density of Time thickens; beyond the Circumference of the Energy Influence the Matter (Space) thickens and the density of Time rarefies."

"On centrifugal energy movement the Matter (Space) rarefies and the density of Time thickens in the Center of Fire Movement. In the Circumference of the Energy Influence in this case the Matter (Space) thickens and the density of Time rarefies. Beyond the Circumference of the Energy Influence the Matter (Space) rarefies and the density of Time thickens."

"The rhythm of the feed, when one Essence rushed another one ahead of itself, rushing itself in its turn ahead of yet another one, doing no harm, adds necessary acceleration to the Movement. In this case the length of the Time flow reduces and manifests the tension of the Time flowing by. The tension, in its turn, reduces the Time flow itself down to manifestation of the Time thickness wave, and, further on, transforms into the Time thickness wave. The tension of the Time thickness compensates the wave into the Time thickness proper and transforms into the Time thickness, and should the Movement acceleration be retained the Time thickness evolves into the Time substance. Thus, Kalagia - the power over Time - is obtained. This effect occurs when the Power of Time is directed within, since Maya is an effect of Time and the Time is an effect of Spirit. Om."

These lines are quoted from the "Kalagia" doctrine. For the time being the doctrine remains an unsurpassed one in terms of its strength and information content. It forces us to ask the question on what is energy, charge, gravity, Time, Space, electric current, again and again. It makes us to ask the question on the place and role of Man in the Universe. Kalagia is an appeal for action.

  1. Conclusion.

  1. The modern concepts of the Universe, galaxies, celestial systems formation, built on an incidental character of events and involving no participation of the Superior Intellect in these processes, are groundless.
  2. Movement in space with the help of electromagnetic fields transformers has nothing to do with regular transportation means.
  3. The modern understanding of the Solar System structure is nothing else but an illusion of information perception. No heliocentric system allows for a concept of movement within the time substance to be built. Consequently, a principally new model with a room to accommodate the time flow concept has to be built.
  4. Electromagnetic fields density dynamics needs its most thorough scientific studies.
  5. Scientific experiments on the study of electromagnetic fields density dynamics have to be most thoroughly prepared and run with utmost care.

Eugene V. Shamala

tel.gif[15 ] Russia,(3952) 45 42 71

Patent bureaus and organizations are most welcomed to conduct patent studies both in Russia and abroad.

m1.gif[12 ]

In a beginning | The Russian version | Main page |